Roland PCR-300 业主指南
79
System settings
Here’s how to specify the control map that will be selected when you turn on the
power.
power.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY12,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1] or [A2] to choose CONTROL MAP No. 0
or LAST ACCESS MEMORY.
or LAST ACCESS MEMORY.
5
Press the [ENTER] button.
Control map settings
Startup Memory
Controller
Indication
Setting
Summary
[A1 (0)]
CONTROL
MAP No. 0
MAP No. 0
Control map number 0 will be load-
ed into current memory (p. 8) when
the PCR starts up.
ed into current memory (p. 8) when
the PCR starts up.
[A2 (1)]
LAST
ACCESS
MEMORY
ACCESS
MEMORY
The control map that you most re-
cently called up or saved will be
loaded into current memory (p. 8)
when the PCR starts up.
cently called up or saved will be
loaded into current memory (p. 8)
when the PCR starts up.
PCR-300_500_800_e.book 79 ページ ２００７年２月２８日 水曜日 午後７時１０分