Roland SH-201 补充手册

 

1PS

 

Model:

SH-201

Date:

March 1, 2006

Version:

1.00

 

■

 

●

 

Status

2nd byte

3rd byte

8nH

kkH

vvH

9nH

kkH

00H

n = MIDI channel number:

0H - FH (ch.1 - 16)

kk = note number:

00H - 7FH (0 - 127)

vv = note off velocity:

00H - 7FH (0 - 127)

 

●

 

Status

2nd byte

3rd byte

9nH

kkH

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

kk = note number:

00H - 7FH (0 - 127)

vv = note on velocity:

01H - 7FH (1 - 127)

 

●

 

*

If the corresponding Controller number is selected for the Patch Control Source 1, 2, 3, 4,
5, 6, 7 or 8 parameter (PATCH Edit Com Matrix Ctrl), the corresponding effect will
occur.

 

❍

 

Status

2nd byte

3rd byte

BnH

00H

mmH

BnH

20H

llH

n = MIDI channel number:

0H - FH (ch.1 - 16)

mm, ll = Bank number:

00 00H - 7F 7FH (bank.1 - bank.16384)

*

Not received when the BANK SELECT RECEIVE SW (SYSTEM COMMON MIDI) is
OFF.

*

The Patches corresponding to each Bank Select are as follows.

 

 BANK SELECT     | PROGRAM   | PATCH
 MSB | LSB       | NUMBER    | NUMBER
-----+-----------+-----------+------------------
 087 | 000       | 001 - 032 | PRESET A-1 - D-8
     | 020       | 001 - 032 | USER   A-1 - D-8

 

❍

 

Status

2nd byte

3rd byte

BnH

07H

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Volume:

00H - 7FH (0 - 127)

 

❍

 

Status

2nd byte

3rd byte

BnH

0AH

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Panpot:

00H - 40H - 7FH (Left - Center - Right), 

 

❍

 

Status

2nd byte

3rd byte

BnH

0BH

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Expression:

00H - 7FH (0 - 127)

 

❍

 

Status

2nd byte

3rd byte

BnH

40H

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Control value:

00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON

 

❍

 

Status

2nd byte

3rd byte

BnH

42H

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Control value:

00H - 7FH (0 - 127)  0 - 63 = OFF, 64 - 127 = ON

 

●

 

Status

2nd byte

CnH

ppH

n = MIDI channel number:

0H - FH (ch.1 - 16)

pp = Program number:

00H - 7FH (prog.1 - prog.128)

*

Not received when the PROGRAM CHANGE RECEIVE SWITCH parameter (SYSTEM
COMMON MIDI) is OFF.

 

●

 

Status

2nd byte

3rd byte

EnH

llH

mmH

n = MIDI channel number:

0H - FH (ch.1 - 16)

mm, ll = Pitch Bend value:

00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)

 

■

 

*

Not received in when the Receive Switch parameter (SYSTEM Com Part MIDI) is OFF.

 

●

 

Status

2nd byte

3rd byte

BnH

78H

00H

n = MIDI channel number: 0H - FH (ch.1 - 16)

*

When this message is received, all notes currently sounding on the corresponding
channel will be turned off.

 

●

 

Status

2nd byte

3rd byte

BnH

79H

00H

n = MIDI channel number: 0H - FH (ch.1 - 16)

*

When this message is received, the following controllers will be set to their reset values.

Controller

Reset value

Pitch Bend Change +/-0 (center)
Modulation

0 (off)

Expression

127 (max)

However the controller will be at minimum.

Hold 1

0 (off)

Sostenuto

0 (off)

 

●

 

Status

2nd byte

3rd byte

BnH

7BH

00H

n = MIDI channel number: 0H - FH (ch.1 - 16)

*

When All Notes Off is received, all notes on the corresponding channel will be turned
off. However, if Hold 1 or Sostenuto is ON, the sound will be continued until these are
turned off.

 

●

 

Status

2nd byte

3rd byte

BnH

7CH

00H

n = MIDI channel number: 0H - FH (ch.1 - 16)

*

The same processing will be carried out as when All Notes Off is received.

 

●

 

Status

2nd byte

3rd byte

BnH

7DH

00H

n = MIDI channel number: 0H - FH (ch.1 - 16)

*

The same processing will be carried out as when All Notes Off is received. OMNI ON
will not be turned on.