Roland rk-500 用户指南

下载
页码 166
 
129
 
Settings
 
1.
 
Access the main screen.
 
If the main screen is not shown, press the [EXIT] button 
several times to access the main screen.
 
fig.d-MainScreen.eps
 
2.
 
In the main screen, touch <Menu>.
 
The menu screen appears.
 
fig.d-Function-01-2.eps
 
3.
 
Touch <USB Driver>.
 
A screen like the following appears.
 
fig.d-Function-14.eps
 
4.
 
Touch 
 
 for “USB Driver.”
 
5.
 
Press the [EXIT] button when you’re finished 
making settings.
 
6.
 
Turn the VIMA’s volume to the minimum 
setting. Next, switch off the power, then turn it 
on again.
 
Normally, you don’t need to install a driver in order to connect 
the VIMA to your computer via the USB connector. However, if 
some problem occurs, or if the performance is poor, using the 
original Roland driver may solve the problem. If you do so, 
make the following setting to specify the USB driver you intend 
to use before you install the driver.
For details on downloading and installing the 
original driver, refer to the Roland website.
Roland website:   http://www.roland.com/
For details on connecting the VIMA to your computer 
via the USB connector, refer to “Connecting Your 
Computer” (p. 137).
 
USB Driver Settings
 
Changing the USB Driver Settings 
(USB Driver)
 
Setting
Explanation
Generic
 
Choose this if you want to use the standard USB 
driver that was included with your computer.
Normally, you should use this mode.
 
Original
 
Choose this if you want to use a USB driver 
downloaded from the Roland website. 
RK-500-e.book 129 ページ 2006年8月11日 金曜日 午後4時29分