Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Roland
  4. v-synth xt
  5. 业主指南

Roland v-synth xt 业主指南

下载
页码 共 212
 
114
 
Creating and Editing Samples (Sample Mode)
 
4.
 
Touch <Edit>.
 
The SAMPLE Loop FWD screen appears.
 
fig.04-11_50
 
5.
 
Touch one of the tabs in the left side of the screen to access 
the desired editing screen.
 
 
For details on each editing operation, refer to the corresponding 
page.
 
6.
 
When you have finished making settings, press [EXIT] to 
return to the SAMPLE Top screen.
 
Functions Common to All Editing Screens
 
“Start,” “End,” and “Current” Settings
 
The V-Synth XT uses seven terms to indicate locations within a 
sample.
 
Sample Start:
 
 Beginning of the sample
 
Sample End:
 
 End of the sample
 
Loop Start
 
, 
 
Loop End:
 
 When the Loop Play is ON, the region 
between these two points will be played repeatedly.
 
Edit Start
 
, 
 
Edit End:
 
 Editing will affect the region between these 
two points.
 
Current:
 
 This is the currently selected location of the sample.
Move the cursor to “Start,” “End,” or “Current” to select the point 
that you want to specify. Then specify the location by turning the 
VALUE dial, by using [INC][DEC], or by dragging your finger over 
the sample in the screen.
 
• The region of the sample between Edit Start and Edit End is 
displayed with the color inverted.
• When Current = Loop/Edit Start, moving Loop/Edit Start will 
cause Current to change as well.
 
It is not possible to move Loop/Edit Start to the right of Loop/
Edit End.
 
 (LENGTH LOCK)
 
This locks the length of the region between the start point (Start) and 
end point (End) of the sample. It is convenient to use this when you 
already know the length of the sample that you need, and want to 
find the right region to use.
After the length has been locked, you can turn the VALUE dial, use 
[INC] [DEC], or drag your finger over the sample in the screen to 
adjust the Start and End locations while maintaining the distance 
between these two points.
 
 
 (LOOP)
 
This switches loop playback on/off. Turn this on if you want the 
loop region specified in the Loop FWD/BWD screen to play 
repeatedly.
 
 (PREVIEW)
 
This plays the sample. During playback, you can touch this once 
again to stop playback.
 
 (Adjust)
 
In the Loop FWD/BWD screen, the Adjust function moves the Loop 
Start, Loop End, or Current locations to the nearest of the following 
locations 1–5.
In edit screens, the Adjust function moves the Edit Start, Edit End, or 
Current locations to the nearest of the following locations 1–7.
 
1
 
Sample Start location
 
2
 
Sample End location
 
3
 
Loop Start location
 
4
 
Loop End location
 
5
 
Current location
 
6
 
Edit Start location
 
7
 
Edit End location
Move the cursor to the point that you want to adjust (“Start,” “End,” 
or “Current”), and touch 
 or 
.
Touching 
 will move the point toward the left, and touching 
 will move it toward the right.
 
In the SAMPLE Encode screen (p. 118), this will move the 
Current location to the closest event.
 
For example, if you wish to touch <PREVIEW> to check whether 
the results of your editing were satisfactory, you can jump the 
current location.
 
In some cases nothing may happen, due to the relation between 
points or the Length Lock setting.
V-SYNTH_XT_e2 114 ページ ２００５年３月２３日　水曜日　午後４時３９分