Roland kc-150 业主指南

 

By using a speaker stand, you can mount the KC-150 at the optimal height for use as a monitor speaker or simple PA device.

 

fig. Caution

 

●

 

The KC-150 is designed to be used only with speaker 

stands whose dimensions meet the specifications 

described below.

Do not use it with a speaker stand that does not meet the 

following specifications.

 

fig.05

fig.06_e

 

●

 

When deciding on a stand to use with the KC-150, make 

sure to pick one that is capable of supporting its weight.

 

●

 

Before use, adjust the speaker stand to a height of 140 cm 

(55-1/8”) or less and a leg spread of 120 cm (47-1/4”) or 

more, as shown in the figure below.

 

fig.08\

 

●

 

Using a speaker stand that does not meet the 

specifications at left or that is adjusted to a height over 

140 cm (55-1/8”), or a leg spread of less than 120 cm (47-

1/4”) may result in damage to equipment or injury due to 

the stand tipping over.

 

●

 

When using KC-150 with a speaker stand, the speaker 

stand must be carefully placed so it is level and sure to 

remain stable.

 

●

 

Cables connected to KC-150 should be given enough 

slack to prevent accidents that might result from someone 

tripping over them.

 

●

 

To prevent accidents due to falls, do not place any object 

on the KC-150 when it’s mounted on a speaker stand.

 

●

 

Always have at least one other person assist you when 

mounting the KC-150 on a speaker stand, or when 

adjusting the height of the stand while the KC-150 

remains mounted on it.

Leg spread: 120 cm (47-1/4”) or more

Diameter: 3.8 cm

(1-1/2”)

Diameter: 

136 cm (53-9/16”) 

or more

Leg spread: 120 cm (47-1/4”) or more

140 cm (55-1/8”)

or less

120 cm (47-1/4”) or more

KC-150_e_A4.book 10 ページ ２００５年４月２８日　木曜日　午前９時０分