Jaton av152 用户手册
Speaker Placement Distance
You can vary the distance of each speaker as follows. The default adjustments are the
parentheses.
F.DIST.12ft. (360cm.) (Front speakers distance) Front speaker distance can be set in 1ft.
(30cm.) steps from 3ft. (90cm.) to 15ft. (450cm.)
C.DIST.12ft. (360cm.) (center speaker distance) Center speaker distance can be set in 1ft.
(30cm.) steps from a distance equal to front speaker distance to a distance 5ft. (150cm.)
closer to your listening position.
R.DIST. 12ft. (360cm.) (rear speakers distance) Rear speaker distance can be set in 1ft.
(30cm.) steps from a distance equal the front speaker distance to a distance 15ft. (450cm.)
closer to your listening position.
For more speaker wire, if you need more longer speaker wire, please contact directly Jaton
Corporation or at
(30cm.) steps from 3ft. (90cm.) to 15ft. (450cm.)
C.DIST.12ft. (360cm.) (center speaker distance) Center speaker distance can be set in 1ft.
(30cm.) steps from a distance equal to front speaker distance to a distance 5ft. (150cm.)
closer to your listening position.
R.DIST. 12ft. (360cm.) (rear speakers distance) Rear speaker distance can be set in 1ft.
(30cm.) steps from a distance equal the front speaker distance to a distance 15ft. (450cm.)
closer to your listening position.
For more speaker wire, if you need more longer speaker wire, please contact directly Jaton
Corporation or at
to order extra wire for 66ft. (20m.)/roll or 83ft.(25m.)/roll.
Speaker Installation
You can select any methods to install your speaker that you desire.
Speaker Stand, Jaton also provide speaker stand for all satellites speaker (L, R, SL, SR and
C), please contact Jaton for more detail.
Speaker mounting, on the back side of each satellite speaker, it has an screw holder which
can be used to mount the speaker either on the wall with a wall mounting kit or on a speaker
stand by using screw type M6 whit-worth type, angle 55
C), please contact Jaton for more detail.
Speaker mounting, on the back side of each satellite speaker, it has an screw holder which
can be used to mount the speaker either on the wall with a wall mounting kit or on a speaker
stand by using screw type M6 whit-worth type, angle 55
o,
, Pitch = 20 and L = 0.24in. (6mm.)
13.