Savin is200e 安装指导
Print Settings
89
3
KKKK
Press [
↓↓↓↓Next], and then select an
through
Note
❒ When you select the “Custom
Ratio” option, use the number
keys or [-] / [+] to enter the val-
ue.
keys or [-] / [+] to enter the val-
ue.
LLLL
By pressing [
↓↓↓↓Next] to display “5.
Create Margin” and “6. Quali-
ty/Speed” as the setup item, select
options for each of them in the
same way that you have done in
steps
ty/Speed” as the setup item, select
options for each of them in the
same way that you have done in
steps
through
MMMM
After all the settings are the way
you want, press [Exit].
you want, press [Exit].
This registers the print settings
you have configured to the “De-
fault” memory area, and returns to
the Print Settings menu.
you have configured to the “De-
fault” memory area, and returns to
the Print Settings menu.
NNNN
While the Print Settings menu is
displayed, press
displayed, press
{{{{2}}}}, {{{{3}}}} or {{{{4}}}}
key to display a corresponding
User Print Settings menu.
User Print Settings menu.
For example, press the
{{{{2}}}} key to
display the User 1 Print Settings
menu.
menu.
OOOO
Repeat steps
for each
of “User 1”, “User 2”, and “User
3” memory areas.
3” memory areas.
PPPP
When you are finished, press [Ex-
it]
it]
.
This returns to the Scanner Fea-
tures menu.
tures menu.
QQQQ
Press [Exit].
This exits the Scanner Features
menu, and returns to the standby
screen that is displayed when you
turn the power on.
menu, and returns to the standby
screen that is displayed when you
turn the power on.
Important
❒ Never turn off the power of this
machine before the standby
screen is displayed. Doing so
can discard all the settings you
have configured, and return this
machine to its factory default
status.
screen is displayed. Doing so
can discard all the settings you
have configured, and return this
machine to its factory default
status.