Savin is760 安装指导
2004 10 G418-8600
Quick Installation Guide
Please read the Safety Information in the Operating Instructions before using this machine. It contains important
information related to USER SAFETY and PREVENTING MACHINE PROBLEMS.
information related to USER SAFETY and PREVENTING MACHINE PROBLEMS.
○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○
○○○○○○○○
○○○○○○○○○○○○○○○○○○○○
○
○
○
○○○○○○○○
○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○
Checking the
Contents of
the Box
Contents of
the Box
Confirming the Installation
Environment
Installing the Scanner
○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○
○
○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Disengaging the Lock
Installing the
TWAIN/ISIS Driver
TWAIN/ISIS Driver
Preparation
Log on to the computer as a member of the Ad-
ministrators group, for installation to Windows
2000/XP, Windows Server 2003, or Windows NT
4.0.
ministrators group, for installation to Windows
2000/XP, Windows Server 2003, or Windows NT
4.0.
This machine can be used both as a TWAIN
scanner and an ISIS scanner. A TWAIN driver
and its applications (DeskTopBinder Lite, etc)
are to be installed for the TWAIN scanner, and
an ISIS driver and its applications (QuickScan,
etc), are to be installed for the ISIS scanner.
scanner and an ISIS scanner. A TWAIN driver
and its applications (DeskTopBinder Lite, etc)
are to be installed for the TWAIN scanner, and
an ISIS driver and its applications (QuickScan,
etc), are to be installed for the ISIS scanner.
Important
❒ Before starting "Found New Hardware Wizard,"
it is necessary to install the TWAIN/ISIS
driver. If the "Found New Hardware Wizard"
started before the installation, click the
[Cancel] button to discontinue the wizard
and then install the TWAIN/ISIS driver.
driver. If the "Found New Hardware Wizard"
started before the installation, click the
[Cancel] button to discontinue the wizard
and then install the TWAIN/ISIS driver.
Start Windows, and then insert the
supplied CD-ROM labeled “Scanner
Driver(s), Utilities and Operating
Instructions ” into the CD-ROM drive
of the client computer.
supplied CD-ROM labeled “Scanner
Driver(s), Utilities and Operating
Instructions ” into the CD-ROM drive
of the client computer.
The CD-ROM Launcher screen appears.
When installation does not
start automatically
start automatically
A Auto Run might not automatically work with
certain operating system settings. In this
case, launch “Setup.exe” located in the CD-
ROM root directory.
case, launch “Setup.exe” located in the CD-
ROM root directory.
Click [TWAIN DRIVER] or [ISIS
DRIVER].
DRIVER].
The installer of the TWAIN/ISIS driver starts.
Follow the instructions on the screen.
Follow the instructions on the screen.
Power off the computer after the
installation is completed.
installation is completed.
Note
❒ Don't power on the computer before the step
procedure, “8. Detecting the Scanner”.
About TWAIN driver help
After you have installed the TWAIN driver, [(Model
Name) TWAIN V4] will be created under [Pro-
grams] of the [Start] menu. Help files for the
TWAIN driver can be displayed from here.
Name) TWAIN V4] will be created under [Pro-
grams] of the [Start] menu. Help files for the
TWAIN driver can be displayed from here.
Notes on using the TWAIN scanner are provided
in “Readme.txt.” Be sure to read them before use.
in “Readme.txt.” Be sure to read them before use.
Image Scanner
North America
G417-17/G418-17
power supply rating:
AC 120V, 60Hz, 2A
Europe
G418-27
power supply rating:
AC 220-240V, 50/60Hz, 1A
North America
G417-17/G418-17
Electrical Outlet Requirements:
AC 120V, 60Hz, min.10A
AC 120V, 60Hz, min.10A
Europe
G418-27
Electrical Outlet Requirements:
AC 220-240V, 50/60Hz, min.5A
AC 220-240V, 50/60Hz, min.5A
Check the contents of the box ac-
cording to the following list. If one
or some items are missing, please
contact your sales or service rep-
resentative.
cording to the following list. If one
or some items are missing, please
contact your sales or service rep-
resentative.
Quick Installation Guide (this sheet)
CD-ROM
Power Cord
Tool
Cleaning Cloth
Safety Instruction Sheet
Two Caps
Remove the plastic bag. Lift the
scanner and move it to the place
where you want to install it.
scanner and move it to the place
where you want to install it.
The scanner location should be carefully
chosen because environmental conditions
greatly affect its performance.
chosen because environmental conditions
greatly affect its performance.
WARNING
• Make sure the wall outlet is near the machine
and easily accessible so that in event of an
emergency it can be unplugged easily.
emergency it can be unplugged easily.
CAUTION
• Keep the machine away from humidity and
dust. A fire or an electric shock might occur.
• Do not place the machine on an unstable
or tilted surface. If it topples over, it could
cause injury.
cause injury.
Optimum Environment Conditions
Recommended temperature and humidity
ADC122S
Important
❒ When the machine is moved from a cold
location to a warm location, sudden tem-
perature changes cause condensation in-
side of the scanner. Wait one hour or more
before turning on the scanner to allow the
condensation to evaporate.
perature changes cause condensation in-
side of the scanner. Wait one hour or more
before turning on the scanner to allow the
condensation to evaporate.
Environments to Avoid
Important
❒ Do not set up the scanner in any of the fol-
lowing types of locations. It may be the
cause of the malfunction.
cause of the malfunction.
• In a location exposed to direct sunlight
• In a location where the scanner will be sub-
jected to blowing air or radiant heat, such
as near an air conditioner or heater
as near an air conditioner or heater
• In a location near other electronic devices,
such as a radio or television set
• In a location subject to extreme tempera-
tures or humidity
• Near a humidifier
Power Connection
Connect the power cord to a power source with
the following specifications:
the following specifications:
Product Specifications
Electrical Outlet Requirements
Space Required for Installing the
Scanner
Scanner
Make sure that the scanner is in a location
where there is enough space to provide a
clearance as illustrated below, and also provide
a comfortable working area in the front.
where there is enough space to provide a
clearance as illustrated below, and also provide
a comfortable working area in the front.
ADC115S
1.
100mm (4inch) or more
ADC116S
2.
800mm (31.5inch) or more
Remove two lock screws fixed on
the back of this machine.
the back of this machine.
ADC082S
Note
❒ Use a coin to remove the screws.
The holes left by the removed
screws are to be covered by the
caps. Put the leg stopper of the caps
into the holes vertically.
screws are to be covered by the
caps. Put the leg stopper of the caps
into the holes vertically.
ADC084S
CAUTION
• This scanner weighs approximately 33 kg.
• Make sure to lift it carefully with two persons
• Make sure to lift it carefully with two persons
or more so as to minimize physical strain.
Careless lifting, reckless handling or allow-
ing it to drop down can cause injury.
Careless lifting, reckless handling or allow-
ing it to drop down can cause injury.
• When transporting over long distances,
please consult an authorized dealer.
Take out the scanner main unit.
ADC057S
Remove the tape.
Important
❒ Save the box and cushioning material in
which the scanner was packed so that they
can be used if it is necessary to transport
the scanner in the future.
can be used if it is necessary to transport
the scanner in the future.
Open the automatic document feeder
(ADF) and remove the protective sheet
on the contact glass.
(ADF) and remove the protective sheet
on the contact glass.
ADC058S
Turn the caps 90 degrees.
Lift the Pressure Panel, and care-
fully pull out the Background Panel
that is fixed with the Velcro.
fully pull out the Background Panel
that is fixed with the Velcro.
ADC071S
The removed screws are to be kept
fixing on the back of the Pressure
Panel.
fixing on the back of the Pressure
Panel.
ADC086S
Return the removed Background
Panel to where it was.
Panel to where it was.
Reference
❒ Regarding how to set the Background Panel,
please refer to a note on the back of the Pressure
Panel.
Panel.
Set the lock lover to the “Unlock”
position.
position.
ADC025S