Rollei RVS1500 用户指南

■ When the remaining lamp life becomes 5% or less,   (yellow) and “Change The Lamp” will be

displayed on the screen. When the percentage becomes 0%, it will change to   (red), the lamp will
automatically turn off and then the projector will automatically enter standby mode. At this time, the
lamp indicator will illuminate in red.

■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will

If the temperature inside the projector increases, due to blockage of the air vents, or the setting location,
“

” will illuminate in the lower left corner of the picture. If the temperature keeps on rising, the lamp

will turn off and the temperature warning indicator will blink, the cooling fan will run, and then the projec-
tor will enter standby mode. After “

” appears, be sure to perform the measures described on page

54.

Lamp indicator

■ The warning lights (ON/STANDBY button, lamp indicator and temperature warning indicator) on

the projector indicate problems inside the projector.

■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate

red, and the projector will enter standby mode. After the projector has entered standby mode,
follow the procedures given below.

Temperature warning indicator

ON/STANDBY button

RVS2000_EN_CD_l

04.9.21, 8:55 AM

53