MGA Entertainment 360308 产品宣传页

Enter preset equalizer menu and other settings.  Move the MODE button to the right to highlight 

the following sub-menus:

This menu lets you control tonal output.  Move the MODE button to the right

   

to highlight NORMAL.  Move the MODE button again to highlight Pop.   Move

   

again for Rock.  Move again to highlight Classical.  Move again for Jazz.  Once

   

you've selected your listening preference, press the MODE button down

   

to confirm and return to the SETTINGS menu.  Move the MODE button to the

   

right to highlight the Repeat Mode menu. 

Repeat Mode  Press the MODE button down to access the REPEAT MODE menu.  Here you  

   

can adjust how the Yaz Lipstick MP3 Player will function in the play mode.   

   

Move the MODE button to the right once for NORMAL playback.   

   

Move the MODE button to the right again to repeat the current selection.  Move 

   

the MODE button again to repeat all selections in memory.  Move the MODE  

   

button to the right again to play all tracks in random sequence.   Once you have   

   

displayed your preferred Play Mode setting, press the MODE button down  

   

to confirm and return to the SETTINGS menu.  Move the MODE button to  

   

the right to highlight Contrast menu.

Contrast 

Move the MODE button to the right or left to adjust the display's contrast level.  

   

When finished, press the MODE button down to confirm.  Move the MODE  

   

button to the right to highlight Backlight menu.

Backlight 

Press the MODE button down to access the BACKLIGHT menu.  Move the  

   

MODE button to the left or right to select how long the backlight display remains  

   

active after a button has been pressed.  There are 4 selections: Always off,

   

5 sec., 10 sec., and Always on.  NOTE:   Using longer backlight display will  

   

use more battery power. Press the MODE button down to return to the  

   

SETTINGS menu.  

Power Set 

Press the MODE button down to access POWER SET mode.  Move  

   

the MODE button to the left or the right to turn the unit off automatically after  

   

2-minutes or 10-minutes or 30 minutes of inactivity.  Once you have made  

   

your selection, press the MODE button down to return to the SETTINGS menu.   

   

Move  the MODE button to the right to highlight the RECORD SET menu.

Record Set 

This menu displays several Bit Rate settings for voice recording.  The sound  

   

quality depends on the Bit Rate selection.  When finished, press the MODE  

   

button down to return to the SETTINGS menu.

Language 

The Yaz Lipstick MP3 Player menus can be displayed in a variety of different  

   

languages.  Press the MODE button down to access the LANGUAGE options.   

   

Then move the MODE button  to the right to scroll through your options.  Once  

   

you find your preferred display language, press the MODE button down to  

   

confirm. Move the MODE button to the right to exit the SETTINGS menu. 

Move the MODE button to the right again to highlight the STORAGE menu

     

where you can find information regarding total internal memory, free memory

   

and firmware version. Press the MODE button down to return to the MAIN menu.

When you are not in a menu screen, move the MODE button to the left or the right to skip to the 

beginning of the next track or return to the beginning of the song in play.  Moving the MODE 

button repeatedly can help to quickly find the beginning of any selection in memory.  The TRACK 

INDICATOR will change each time the MODE button is pressed.   

Press the plus (+) or minus (-)  button to raise or lower the volume.  As the volume is adjusted, a 

bar graph display will appear on screen to show the loudness level  (from minimum to maximum).

This sliding switch helps prevent accidental mishaps while you and your Yaz Lipstick MP3 Player 

are in motion.  Slide it to the right to activate.  With HOLD activated, the player will continue to 

function, but the volume cannot be adjusted and power cannot be turned off.  Deselect HOLD 

(slide the switch to the left) to unlock the player and make desired adjustments.

This spring-activated clip provides a safe, secure way to attach the player to a belt or pocket for 

more convenient on-the-go listening.

•  Use alkaline batteries for best performance and longer life.

•  Use only the type battery recommended for the unit.

•  Batteries should be replaced only by an adult.

•  Insert batteries with the correct polarity ( + and – ).

•  Do not mix different types of batteries or old and new batteries.

•  Do not short-circuit batteries.

•  When not used for an extended time, remove batteries to prevent possible  

 

  leakage and damage to the unit.

•  Do not mix rechargeable and non-rechargeable batteries.

•  Rechargeable batteries are to be removed from the toy before charging.

•  Rechargeable batteries are to be recharged only under adult supervision

•  Do not recharge non-rechargeable batteries

•  Do not dispose of batteries in fire as they may leak or explode.

•  Exhausted batteries are to be removed from the toy.

•  Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

NOTE:  The voltage of a fully-charged, rechargeable battery is often lower than that of a fresh 

alkaline battery.  Therefore, it is recommended that alkaline batteries be used instead of 

rechargeable batteries for best performance and for longest play time.

1.   Clean outside of unit with a damp cloth only.  

2.   Do Not use attachments not recommended by the product manufacturer. 

3.   Do Not use this product near water or moisture of any kind.

4.   Do Not subject this product to extreme heat or cold.

5.   Avoid prolonged exposure to excessive noise.  Prolonged listening to the MP3 Player at  

    full volume can damage your hearing! 

6.   Maximum output voltage ≤ 150mV.

        

WARNING: To avoid electrical shock, never attempt to break or open the player and touch 

the electrical component while it is charged.  No user serviceable parts are inside.

PROBLEM 

                                                                      

The power turns off and 

pressing the “Play/Pause” 

button does not activate 

the player.

The battery is dead.

Replace the battery.

Nothing happens when the 

buttons are pressed. 

The “Hold” switch is on.

The battery is dead.

Disengage the “Hold” 

switch. Replace the battery.

After connecting to a PC,

Yaz Lipstick MP3 Player 

does not seem to 

communicate with computer.

Bad connection.

Make sure all USB 

connections are snug and 

tight.

Disabled port..

Make sure USB port on PC 

is enabled (See your PC's 

owner's manual).  For 

Windows 98, make sure 

the correct USB driver is 

installed.  (See Total Media 

software documentation.)

CAUSE   

SOLUTION

NOTE:  This equipment has been tested and found to comply with the limits for Class B digital 

device, pursuant to Part 15 of FCC Rules.  These limits are designed to provide reasonable 

protection against harmful interference in a residential installation.  This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications.   However, there is no 

guarantee that interference will not occur in a particular installation.   If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or 

more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver  

  is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible 

for compliance could void the user’s authority to operate the equipment.

        WARNING!

•  Changes or modifications to this unit not expressly approved by the party responsible for 

  compliance could void the user’s authority to operate the equipment.

•  Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

•  Please keep this manual as it contains important information.