Brady BP-IP300 用户指南

Control Panel

 offers the option of checking incoming control sequences 

at the interface when working with direct programming. The incoming 
commands at the printer are printed out as text. In addition, a corresponding 
error message is printed out immediately after an error occurs.

The printout is started after four lines have been received.

NOTE: Continuous media is most suitable for this function.

NOTE: You can adjust the width of the printout down to 2 inches 

(50 mm) with the Width ASCII dump parameter.

1. Press the menu key.

2. Select Test > ASCII Dump Mode menu.

3. Press the 

  key to switch to Monitor mode.

4. Use the feed key to call up the last few lines of a label description.

You can cancel the printout with the cancel key.

Figure 30 is an illustration of a sample ASCII Dump printout.