Brady BP-IP300 用户指南

Control Panel

Press the menu key.

Select Setup > Machine param.

Shifting of the entire print image perpendicular to 
the direction of paper flow. 
The absolute shifting is limited by the margins of the 
print zone. Those are determined by the width of the 
printing line on the printhead.
You can also set the Printhead pos. X via 
software. The offset values from the Machine 
param.

 menu and the software are added together. 

0.0 mm

Shifting of the entire print image in the direction of 
paper flow. With positive values, printing begins 
later in the direction of paper flow.
Shifting of the print image in the direction of paper 
flow also influences the peel and tear positions.
Correct the peel position and tear position 
parameters by the same value in the opposite 
direction.
You can also set the Printhead pos. Y via 
software. The offset values from the Machine 
param.

 menu and the software are added together.

0.0 mm

Configuration of the Peel-off parameters for devices 
with Peel-off function.

In the peel position or individual label tear-off 
position, the label may not advance enough for the 
operator to get a grip on the label and remove it. 
Increasing this value from zero advances the 
printed label the selected distance until it is 
removed. After the label is removed, the next label 
automatically moves to the correct printing position. 
The maximum recommended setting for the peel 
position is 6.0 mm. 

0.0 mm