Motorola i30sx 安装指导
135
i30sx Faceplates and Keypads
Your i30sx phone comes with a standard faceplate and keypad. You can order
additional face plates and keypads to change the look of your phone.
additional face plates and keypads to change the look of your phone.
The following steps and accompanying illustration detail the procedure for
removing and replacing the changeable faceplate and keypad.
removing and replacing the changeable faceplate and keypad.
NOTE: Before replacing the faceplate, ensure that the keypad is
present and undamaged. For security and operational reasons,
power to the i30sx phone should be off prior to performing the
removal and replacement procedure. There is a protective
plastic liner over the lens. Peel off prior to operation.
power to the i30sx phone should be off prior to performing the
removal and replacement procedure. There is a protective
plastic liner over the lens. Peel off prior to operation.
Removal and Replacement Procedure
1
While holding the back of the phone, press the
faceplate release button located at the bottom of
the phone to release the faceplate. When you
press the release button, ensure that both sides
are disengaged from the faceplate prior to
removal.
faceplate release button located at the bottom of
the phone to release the faceplate. When you
press the release button, ensure that both sides
are disengaged from the faceplate prior to
removal.
2
In an upward motion, grasp the bottom part of the faceplate and detach
it from the phone.
it from the phone.
3
Remove the keypad from the phone (or from the faceplate).
Release Button