Motorola r750plus 用户指南

66

1.Position the accessory connector so that its 
coiled cord extends from the bottom of the por-
table and its latch is on your left.
2.Insert the RSM’s accessory connector into the 
bottom of the portable (push both tabs on the 
accessory connector when inserting into the por-
table).
3.Push the accessory connector firmly against 
the portable to make sure it is held in place.
4.Attach the smaller end of the cable-restraint 
clip on the straight portion of the coiled cord.
5.Attach the larger end of the cable-restraint clip 
to the base of the antenna.

6.

Adjust the cord length in the smaller end of the cable restraint clip until it is 
comfortable.

Please read the safety information contained in the user’s guide supplied with 
the portable before operating this equipment.

The remote speaker/microphone (RSM) only operates when the portable is in 
the voice-dispatch mode (group or private call).

For optimum performance from your RSM, wear the radio 
and RSM so that the accessory cord will not cross over or 
touch the antenna. Also, try to wear the radio and 
accessory combination fairly close to each other to avoid 
strain on the accessory connector.

When the RSM is connected to the radio’s bottom accessory connector, the 
radio’s speaker is muted, and the audio is only heard from the RSM speaker. 
Similarly, when a secondary receiver audio accessory is plugged into the 3.5 
mm audio jack, audio to the RSM is rerouted to the secondary accessory.

Connecting the remote speaker/microphone to the radio does not disable the 
radio’s microphone and PTT button.