Motorola HS830 快速安装指南

Peel the backing off the back of 
the adapter and mount the adapter 
to the helmet in the desired 
location.

Peel the backing off the Velcro

®

 on 

the speaker. Place the speaker 
inside the helmet where it will be 
close to your ear.

Alternatively, insert the tie wrap 
through the slots on the back of 
the speaker and use the tie wrap 
to strap the speaker inside the 
helmet. You may have to push the 
tie wrap through the liner of the 
helmet.

Installing the Wireless 
Module

Point the microphone toward your 
mouth.

For best performance, the side of 
the microphone with the white dot 
on it should be closest to your 
mouth.

Press the outside latch to open the 
helmet adapter cover.

Insert the HS830 Wireless Module 
into your helmet adapter. Slide 
your Wireless Module completely 
onto the audio plug in the helmet 
adapter.

Close the helmet adapter cover 
completely to secure the Wireless 
Module.

While wearing the helmet, point 
the microphone boom close to 
your mouth for best voice pickup.

Wireless Module

Latch

Helmet Adapter

Microphone

Plug

Pairing Your Wireless 
Module and Phone

With the headset and phone near each 
other:

With the wireless module off, 
press and hold the MFB until the 
LED remains on (about 5 
seconds).

Perform a device discovery from 
your phone. 
For details on device discovery 
for your phone, refer to the 
phone’s user’s guide.

When the scan is complete, your 
phone displays the devices found.