Rollei dr4 软件指南
34
Connecting the Camera
to a Computer
After installing the software on your
computer, connect your camera to it.
computer, connect your camera to it.
1.
Make sure the camera power is
off.
off.
2.
Connect the USB cable to the
USB port of your computer.
USB port of your computer.
3.
Connect the USB cable to the
USB terminal of your camera.
USB terminal of your camera.
Your camera turns on.
• To disconnect the camera from your computer:
1.Turn your camera off.
2.Unplug the USB cable.
2.Unplug the USB cable.
• It is recommended that you use the AC Adapter
(sold separately) when you are downloading images
from your camera.
from your camera.
Downloading Images to
Your Computer
After you have connected your camera to the
computer, images are downloaded
automatically.
computer, images are downloaded
automatically.
Images are downloaded to your computer from the
following memory sources.
following memory sources.
Downloading methods differ (as described in
the following table) depending on the
environment used. Refer to the respective
page to download your images.
the following table) depending on the
environment used. Refer to the respective
page to download your images.
When no memory card is
loaded
loaded
When an SD Memory
Card is loaded
Card is loaded
Loads from internal
memory
memory
Loads from the SD
Memory Card
Memory Card
For Mac OS 8.6 to
9.2.2
9.2.2
Download using DL-10.
For Mac OS X 10.1.2
to 10.3
to 10.3
Download using the
Mounter.
Mounter.