Rollei dr4 软件指南
40
About computer connection and software
Symptom 1 Cannot download images
Measure 1
Your computer does not recognize the camera correctly.
Follow the steps below.
Follow the steps below.
For Windows 98/98SE/Me
Step 1: First, follow the steps below.
1. Load the CD-ROM into your computer.
2. Connect your camera via the USB cable to your computer.
3. Click the [Start] button on the Windows taskbar to display the [Start] menu.
4. On the [Start] menu, point to [Settings], and then click [Control Panel].
5. On the Control Panel displayed, double-click the [System] icon.
6. On the [System Properties] screen displayed, double-click the [Device Manager] tab.
7. On the [Device Manager] tab page displayed, click [+] on the left side of [Other Devices].
8. Check if there is [DSC 724] below it. If there is, click [DSC 724], and then click the [Delete]
1. Load the CD-ROM into your computer.
2. Connect your camera via the USB cable to your computer.
3. Click the [Start] button on the Windows taskbar to display the [Start] menu.
4. On the [Start] menu, point to [Settings], and then click [Control Panel].
5. On the Control Panel displayed, double-click the [System] icon.
6. On the [System Properties] screen displayed, double-click the [Device Manager] tab.
7. On the [Device Manager] tab page displayed, click [+] on the left side of [Other Devices].
8. Check if there is [DSC 724] below it. If there is, click [DSC 724], and then click the [Delete]
button at the bottom of the [Device Manager] tab.
The entry [DSC 724] is deleted.
The entry [DSC 724] is deleted.
9. Click [OK] to close the [System Properties] screen.
10.When the display returns to the Control Panel, double-click the [Add/Remove] icon.
11.On the [Add/Remove Applications Properties] screen displayed, select [DSC Software],
10.When the display returns to the Control Panel, double-click the [Add/Remove] icon.
11.On the [Add/Remove Applications Properties] screen displayed, select [DSC Software],
and then click the [Add/Remove] button.
This uninstalls the DSC Software.
This uninstalls the DSC Software.
12.Click [OK] to close the [Add/Remove Applications Properties] screen.
13.Click the [x] (Close) button to close the Control Panel.
14.Turn off your camera and computer.
15.Turn your computer back on and reinstall the software from the CD-ROM.
13.Click the [x] (Close) button to close the Control Panel.
14.Turn off your camera and computer.
15.Turn your computer back on and reinstall the software from the CD-ROM.
*At this time, do not connect your camera.
16.Connect your camera via the USB cable to your computer.
When the computer recognizes the camera, the [New Hardware] screen launches and
your camera is registered by the computer.
your camera is registered by the computer.