Sony pcg-grv616g 用户指南

下载
页码 108
Sony Notebook 
User Guide
Getting help
84
The optional PCGA-UFD5 (USB) floppy disk drive is not recognised as drive A
To set the UFD5 to A, proceed as follows :
1
Turn the system power on.
2
Connect the UFD5.
3
Select Control Panel from the Start menu.
4
Double-click System.
5
Select the Hardware tab, then click Device Manager.
6
Select Universal Serial Bus controllers, then Y-E Data USB Floppy.
7
From the Action menu, click Uninstall.
8
Keep clicking OK until the Confirmation of deletion of device message appears.
9
Select Scan for hardware changes from the Action menu.
The UFD5 is recognised as drive A.
About sound
My speakers are not producing sound
The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers.
The speaker volume may be turned to the minimum. Press <Fn>+<F4>, and then press 
 
or 
 
to increase 
the volume.
If your computer is powered by battery, check that the battery is inserted properly and that it is charged.
If you are using an application that has its own volume control, check that the volume is turned up.
Check the volume controls in Windows
®
.
If you use external speakers, check that the speakers are properly connected and the volume is turned 
up. If the speakers have a mute button, make sure it is off. If batteries power the speakers, check that 
the batteries are inserted properly and that they are charged.
If an audio cable or a set of headphones has been connected to the headphone connector, disconnect 
the cable.