Enterasys csx200 用户手册

CSX200 Installation Guide

5-11

Check that TCP/IP Routing is set on and is enabled at the remote end.

Check that the IP address of the LAN beyond the remote router is correct, as well as the 
associated Subnet Mask.

If the remote router WAN IP address and Subnet Mask are required, check that they have been 
specified correctly.

Check that, if required, the source and remote WAN IP addresses are on the subnetwork.

Check that you have seeded the routing table, if RIP is not allowed to flow on the WAN link.

Be sure to reboot if you have made any IP address, control or protocol option changes.