Enterasys csx200 用户指南
WAN Configuration Using Local Management
CSX200 Family User’s Guide
169
WAN Physical Configuration Screen Fields
The following list describes the WAN Physical Configuration screen fields.
WPIM # —
Displays configuration information for the WPIMs that are installed.
Type —
Displays the WPIM type.
BRIM # —
Displays the BRIM slot in which the WPIM resides.
Mode —
Displays the WPIM mode.
Active —
Displays the status of the WPIM.
Ifaces —
Displays the interfaces available to each WPIM.
WPIM-HDSL Configuration Fields
HDSL Tx Clock Source —
Displays the HDSL Transmit Clock Source. The selections for this
field toggle between Loop-Timing (Extracted Line Data) and Local-Timing (Internal Clock). The
default setting for this field is Loop-Timing.
default setting for this field is Loop-Timing.
HDSL Timeslot Configuration —
Displays the timeslot configuration for the WPIM. The
selections for this field toggle between Full and Fractional. The default setting for this field is Full.
Full uses all 24 timeslots and Fractional uses the first 12 timeslots.
Full uses all 24 timeslots and Fractional uses the first 12 timeslots.
NOTE
The Loop-Timing selection in this Local Management screen corresponds to the Slave
selection in the QuickSET HDSL WAN Configuration window; the Local-Timing
selection corresponds to the Master selection.
selection in the QuickSET HDSL WAN Configuration window; the Local-Timing
selection corresponds to the Master selection.