Enterasys csx200 用户指南
About the CSX200
8
CSX200 Family User’s Guide
Remote Management Capabilities
Manage the CSX200 remotely with any SNMP network management system including the
following:
following:
•
Cabletron Systems SPECTRUM for Open Systems
•
Cabletron Systems Remote SPECTRUM Portable Management Applications (SPMAs)
•
Cabletron Systems QuickSET
•
Cabletron Systems SPECTRUM Element Manager (SPEL)
•
Third party SNMP compliant Network Management Packages
Optional Features
Rack Mounting Capabilities —
The CSX200 can be installed in a 19-inch rack with an
accessory package that includes the rackmount brackets, a strain-relief bracket for cable
management, and mounting screws. The part number for the accessory package is
CSX200-ACCY-KIT. See
management, and mounting screws. The part number for the accessory package is
CSX200-ACCY-KIT. See
for complete rack mounting instructions.
Hardware Data Compression Module (CSX200-COMP/ENCR) —
The same industry standard
STAC Electronics Stacker LZS Compression algorithm supported by CSX200 software is made
available by an optional hardware data compression module that accelerates data compression for
the CSX200 over PPP and Frame Relay. Depending on the packet type and size, hardware data
compression provides a minimum of 2:1 data compression, giving 3 Mbps throughput on a T-1
WPIM interface. To use the hardware data compression module, compatible equipment (such as
the CSX200, CSX400, and HSIM-W6 or other vendors’ equipment which conforms to the
applicable standards), must be in use at both ends of the WAN link. When the hardware data
compression module is installed on the board, it automatically assumes the compression task from
software. There is no configuration necessary to prioritize hardware over software compression.
available by an optional hardware data compression module that accelerates data compression for
the CSX200 over PPP and Frame Relay. Depending on the packet type and size, hardware data
compression provides a minimum of 2:1 data compression, giving 3 Mbps throughput on a T-1
WPIM interface. To use the hardware data compression module, compatible equipment (such as
the CSX200, CSX400, and HSIM-W6 or other vendors’ equipment which conforms to the
applicable standards), must be in use at both ends of the WAN link. When the hardware data
compression module is installed on the board, it automatically assumes the compression task from
software. There is no configuration necessary to prioritize hardware over software compression.
CSX200 Firmware Support
The CSX200 firmware supports IEEE 802.1d bridging, and IP and IPX routing,. Wide Area
Networking includes
Networking includes
and
Frame Relay
. Remote access is via Full
or Fractional T1, E1, Synchronous, Digital Data Service, or HDSL connections.
This device supports industry-standard protocols, security features, compression algorithms and
network management tools to ensure interoperability with equipment from other vendors.
network management tools to ensure interoperability with equipment from other vendors.