Enterasys csx5500 用户指南
USER’S GUIDE
116 CyberSWITCH
4.
For BRI and PRI resource types: select the proper BRI/PRI switch type for the lines you will be
using. The
using. The
in the Overview identifies which switch types are available; your carrier will
identify which particular switch is used in your area. If you select the NET3 or NET5
international switch, you will be prompted for the region of operation:
international switch, you will be prompted for the region of operation:
Select the appropriate region. Based upon the region you select, you will be presented with a
list of countries. Select the country of operation from this list. If you cannot find your country
on any list, return to the Region Menu and select the default value (1).
list of countries. Select the country of operation from this list. If you cannot find your country
on any list, return to the Region Menu and select the default value (1).
For PRI resource types only:
a.
a.
Select the correct synchronization type. Select either clock master or clock slave. If unsure,
configure as “Slave.”
configure as “Slave.”
b.
For a PRI_4ESS carrier switch type, select which software load (generic # ) the switch is
running. Obtain this information from your carrier.
running. Obtain this information from your carrier.
c.
For a Teleos Simulator carrier switch type, select the switch type that Teleos is simulating.
5.
For the Digital Modem resource type:
a.
a.
Select from DM-8, DM-24, and DM-30. Note that DM-24 refers to both the V34+ modem
adapter as well as the K56Flex modem adapter. If you specify DM-24, the CyberSWITCH
will distinguish between the two.
adapter as well as the K56Flex modem adapter. If you specify DM-24, the CyberSWITCH
will distinguish between the two.
b.
Select the Pulse Code Modulation (PCM) encoding method appropriate for your country.
Choices include mu-law and A-law.
Choices include mu-law and A-law.
6.
For encryption resource types:
From the list of resource types, choose DES_RSA. (Refer to the
From the list of resource types, choose DES_RSA. (Refer to the
chapter.)
U
SING
M
ANAGE
M
ODE
C
OMMANDS
resource
Displays the current resource configuration.
R
ESOURCE
C
ONFIGURATION
E
LEMENTS
R
ESOURCE
T
YPE
The type of adapter (resource) that plug into the system. WAN adapters are the physical interface
for the attachment of lines (i.e., connections) to your system.
for the attachment of lines (i.e., connections) to your system.
R
ESOURCE
S
LOT
The slot number into which the resource is plugged.
S
WITCH
T
YPE
For ISDN resources (BRI and PRI) only. The switch type you wish to configure.
1)
DEFAULT
2)
AFRICA
3)
AMERICAS
4)
ASIA
5)
EUROPEAN
6)
PACIFIC-RIM
Region from above [default = 1]: