Enterasys csx5500 用户指南
USER’S GUIDE
228 CyberSWITCH
The password control character is a key sequence you specify to switch between the login mode
and the change password mode. In order to enable this feature for the general user, you need to
configure this password control character.
and the change password mode. In order to enable this feature for the general user, you need to
configure this password control character.
L
OGIN
C
ONFIGURATION
S
PECIFIC
TO
TACACS S
ERVER
C
ONFIGURING
TACACS S
ERVER
L
OGIN
I
NFORMATION
U
SING
CFGEDIT
1.
Select option (4), Login Configuration Specific to TACACS Server from the Network Login
Information menu. If you need guidance to find this menu, refer to the instructions provided
in the
Information menu. If you need guidance to find this menu, refer to the instructions provided
in the
configuration section. The following screen will be
displayed:
2.
Selection (1) from the TACACS Specific Device Login Menu allows you to change the password
control character:
control character:
3.
Selection (2) from the TACACS Specific Device Login Menu allows you to customize the
prompt order for device login. This prompt is particularly important, because the order of
prompts must be the same as the order expected by the TACACS server. Selection (2) displays
the following:
prompt order for device login. This prompt is particularly important, because the order of
prompts must be the same as the order expected by the TACACS server. Selection (2) displays
the following:
4.
Selection (3) from the TACACS Specific Device Login Menu allows you to adjust the return
code messages upon login attempt:
code messages upon login attempt:
TACACS Specific Device Login Menu:
1) Password Control Character is ^R.
2) Prompt Order for Device Login.
3) Messages for TACACS Return Codes.
4) Return to the Previous Menu.
2) Prompt Order for Device Login.
3) Messages for TACACS Return Codes.
4) Return to the Previous Menu.
Select function from above or <RET> for previous menu: 1
Enter control character used to switch from LOGIN to CHANGE PASSWORD mode.
Select the control character that you wish to us by typing
caret (‘^’) followed by another character (example: ^A),
or ‘0’ to disable [Default = ^R]? <RET>
Select the control character that you wish to us by typing
caret (‘^’) followed by another character (example: ^A),
or ‘0’ to disable [Default = ^R]? <RET>
TACACS Device Login Prompt Order Menu:
Current Prompt Order is:
-----------------------------------------------------------------
First Prompt is LOGIN ID PROMPT (fixed)
Second Prompt is DYNAMIC PASSWORD PROMPT
Third Prompt is USER PASSWORD PROMPT
-----------------------------------------------------------------
First Prompt is LOGIN ID PROMPT (fixed)
Second Prompt is DYNAMIC PASSWORD PROMPT
Third Prompt is USER PASSWORD PROMPT
1) Prompt Order
Select function from above or <RET> for previous menu:
Select function from above or <RET> for previous menu: