Enterasys csx5500 用户指南
USER’S GUIDE
346 CyberSWITCH
c.
Press <RET> to return to the IPX Device Spoofing menu. Press 2 to configure SPX
Watchdog Spoofing. The following menu will be displayed:
Watchdog Spoofing. The following menu will be displayed:
d. The screen includes default configuration values. If needed, make changes to the default
values.
e.
Press <RET> to return to the IPX Device Spoofing menu. Press 3 to configure serialization
packet handling. The following menu will be displayed:
packet handling. The following menu will be displayed:
f.
The screen includes default configuration values. If needed, make changes to the default
values.
values.
g.
Press <RET> to return to the IPX Device Spoofing menu. Press 4 to configure message
packet handling. The following menu will be displayed:
packet handling. The following menu will be displayed:
h. The screen includes default configuration values. If needed, make changes to the default
values.
R
EMOTE
LAN D
EVICES
Remote LAN devices are configured in a slightly different way than WAN devices. Since the
remote device is a bridge and not an IPX router, the IPX options for Remote LAN devices are
configured under the bridge-level options, as follows:
remote device is a bridge and not an IPX router, the IPX options for Remote LAN devices are
configured under the bridge-level options, as follows:
U
SING
CFGEDIT
1.
Select Security from the main menu.
2.
Select Device Level Databases from the security menu.
Device Level SPX Watchdog Spoofing Menu:
1) Default Handling is Discard
2) Handling while the connection is up is Forward
3) Handling for the special period after disconnecting is Spoof
4) Special period of time after disconnecting is 120 Minutes
Select function from above or <RET> for previous menu:
2) Handling while the connection is up is Forward
3) Handling for the special period after disconnecting is Spoof
4) Special period of time after disconnecting is 120 Minutes
Select function from above or <RET> for previous menu:
Serialization Packet Handling:
1) Always Discard
2) Forward only when the connection is up
3) Always Forward
1) Always Discard
2) Forward only when the connection is up
3) Always Forward
Current Serialization Packet Handling is "Forward only when the connection is up".
Select function from above or <RET> for previous menu: 1
Message Packet Handling:
1) Always Discard
2) Forward only when the connection is up
3) Always Forward
1) Always Discard
2) Forward only when the connection is up
3) Always Forward
Current Message Packet Handling is "Forward only when the connection is up".
Select function from above or <RET> for previous menu: <RET>