Enterasys csx5500 用户指南
Central Site Remote Access Switch 591
S
YSTEM
C
OMMANDS
Bridge Commands
atalk stats rtmp
Displays the AppleTalk Routing Table Maintenance Protocol (RTMP) statistics.
atalk stats zip
Displays the AppleTalk Zone Information Protocol (ZIP) statistics.
atalk stats nbp
Displays the AppleTalk Name Binding Protocol (NBP) statistics.
atalk stats atp
Displays the AppleTalk Transaction Protocol (ATP) statistics.
atalk zone
This command will display AppleTalk zone information. A sample output screen is shown
below:
below:
The fields in this display are defined as follows:
zone
The AppleTalk zone name for the network that the AppleTalk port is connected to.
The AppleTalk zone name for the network that the AppleTalk port is connected to.
network range
Specifies the network range associated with the indicated zone.
Specifies the network range associated with the indicated zone.
B
RIDGE
C
OMMANDS
The following commands are used to display bridging information and statistics.
pkt mac
Enables the MAC address monitor display. The MAC Address Monitor screen displays
information contained in the LAN frames that are sent over the ISDN connections. The packets
represented by the displayed MAC address pairs will not be captured unless the br pkt capture
feature is on (enabled).
information contained in the LAN frames that are sent over the ISDN connections. The packets
represented by the displayed MAC address pairs will not be captured unless the br pkt capture
feature is on (enabled).
When the MAC Address monitor is enabled, the CyberSWITCH inspects each LAN frame sent
or received over the ISDN connections. It displays the Destination MAC Address, Source MAC
Address, and Ethernet type field for each LAN frame.
or received over the ISDN connections. It displays the Destination MAC Address, Source MAC
Address, and Ethernet type field for each LAN frame.
zone network range
------------------ -------------
zone1 225 - 226
zone2 236 - 237
------------------ -------------
zone1 225 - 226
zone2 236 - 237