Enterasys csx5500 用户指南
Central Site Remote Access Switch 605
S
YSTEM
C
OMMANDS
IPX Routing Commands
T/P (Type/Protocol)
Type
The destination type is “R” for a remote network or host, and “L” for a locally connected
network or host.
network or host.
Protocol
The mechanism used to determine the route. “L” is for local, “I” is icmp, and “R” is for RIP.
TTL
Time to Live for this route entry in seconds. This entry will expire after the specified number
of seconds. A value of 999 implies that the entry will not expire.
of seconds. A value of 999 implies that the entry will not expire.
IF
The interface Id.
Age
The age of the route in seconds.
ip route <IP address>
Displays the routing information for the indicated device. The meaning of each displayed field
for a route entry is included in the above
for a route entry is included in the above
ip route
command explanation.
ip stats
Displays the current IP related statistics. Refer to
for definitions.
IPX R
OUTING
C
OMMANDS
IPX routing must be enabled before these commands can be used.
The following commands are used to display IPX routing information:
ipx ipxwan clear
Clears IPXWAN statistics.
ipx ipxwan stats (device)
Displays system-level IPXWAN statistics when device name not specified:
IPXWAN Statistics
Timer Request
=
Timer Response
=
Information Request
=
Information Response
=
Thruput Request
=
Thruput Response
=
Delay Request
=
Delay Response
=
NACK Sent
=
NACK Received
=
Bad Packets
=