Enterasys 6000 用户指南
Configuring Bridging
13-9
Filter Name
helps the user identify the filter. The name is not used by the software.
SSAP Value
identifies the source Service Advertising Protocol (SAP).
DSAP Value
identifies the destination SAP.
Filter Name
helps the user identify the filter. The name is not used by the software.
Protocol ID Value
is the IEEE 802 value of the protocol (SNAP or Type II) to which the filter will apply.
Filter Name
helps the user identify the filter. The name is not used by the software.
Source NetBIOS Name
should be obtained from a system administrator.
Destination NetBIOS Name
should be obtained from a system administrator.
Table 13-5 Bridge Protocol Filter Parameters
Parameter
Valid Values
Default Value
Fi lter Name
1–31 characters
none
Protocol ID Value
0–ffff (2 bytes)
0000
Protocol ID Mask
0–ffff (2 bytes)
0000
Table 13-6 Bridge NetBIOS Filter Parameters
Parameter
Valid Values
Default Value
Fi lter Name
1–31 characters
none
Source NetBI OS Name
1–36 characters
none
Destination NetBIOS Name
1–36 characters
none