Enterasys els10-27mdu 用户指南
Configuring VLAN
9033276
7
Configuring VLAN
The ELS10-27MDU is pre-configured when shipped. Each of the 10Mbps
ports is a separate VLAN with only the CPU and the 100Mbps uplink port
as members of this VLAN. This provides for maximum security in a
Multiple Dwelling Unit environment. The VLAN configuration may be
changed, however, to suit different needs.
ports is a separate VLAN with only the CPU and the 100Mbps uplink port
as members of this VLAN. This provides for maximum security in a
Multiple Dwelling Unit environment. The VLAN configuration may be
changed, however, to suit different needs.
Adding a VLAN
To create a new VLAN, type:
vlan [add PORT-RANGE NAME VLAN-ID [IPADDR] [IPMASK]]
The port range is a number from 1 to 27.
The Name can be up to 32 ascii characters (optional).
The VLAN-ID is the hexidecimal id number. Pre-configured VLANs are
0x001 through 0x01c.
0x001 through 0x01c.
The IPADDR is the IP address of the unit to be added.
The IPMASK is the IP mask for the IP addresses.
Deleting a VLAN
To delete a VLAN, type:
vlan [del[ete] PORT-RANGE {NAME | VLAN-ID}]
The port range is a number from 1 to 27.
The NAME | VLAN-ID identifies the VLAN to be deleted either by ascii
character name or by hexidecimal id number.
character name or by hexidecimal id number.