Seiko Instruments slp120 用户指南
Chapter 2
Getting Started
User Guide
2-13
Changing the COM Port
The COM port connection for the SLP is automatically
detected and selected during installation. If you change the
SLP to a different COM port after installation, you will need
to change the setting in the Smart Label program.
detected and selected during installation. If you change the
SLP to a different COM port after installation, you will need
to change the setting in the Smart Label program.
1 Choose Printer setup from the Label menu.
2 Select the new COM port in the Printer Setup dialog box
and click OK.
If you have trouble using the new COM port, check the on-
line help.
line help.
slp120-2.bk Page 13 Friday, March 3, 2000 12:40 PM