TiVo Series2 安装指南

B a c k   P a n e l   R e f e r e n c e

 (Connects to A/C power.) The DVR does not use a separate on and off switch; 

plugging it into the wall socket switches it on.

(Connects to phone line.) The DVR uses the phone line to get program 

listings and to communicate with the TiVo Service. If you already have a phone line 
connected to your cable box, use the provided splitter.   

(Connects to cable or satellite box; IR stands for infrared.)  This 

connection enables the DVR to change channels on your cable or satellite box.  The purple 
end of the IR Control cable plugs into the DVR. The two emitters on the other end of the 
cable are placed in front of the IR sensor on the cable and/or satellite box.

(Connects to cable or satellite box; a Serial/Data connector is not 

available on all cable or satellite boxes.) This connection enables the DVR to change 
channels on a cable or satellite box.

(Universal Serial Bus.) For future use.

6 - Left/Right Audio Outputs: 

(Connects to TV.) Connect the Left/Right Audio cables 

(the white and red ones) to these connectors.   

7 - Composite Video Outputs:

 (Connects to TV.) Composite Video provides a picture 

with very good quality. It is used with the Left/Right Audio cables (the white and red 
ones).

Composite Video 
and L/R 
Audio Cables

Connect to 
Composite Video
and L/R Audio Jacks

(yellow)

(white)

(red)