TiVo Series2 网络指南
Connecting to a Home Network Using Wired (Ethernet)
2
12
Connecting to a Home Network Using
Wired (Ethernet)
Wired (Ethernet)
This example shows you how to connect a TiVo Series2 DVR to a network
hub using a wired (Ethernet) network adapter. You can leave your DVR
plugged in while you connect a network adapter.
hub using a wired (Ethernet) network adapter. You can leave your DVR
plugged in while you connect a network adapter.
To connect a wired (Ethernet) network adapter to your TiVo Series2 DVR
and your network hub, follow these steps:
and your network hub, follow these steps:
1. Connect to the DVR. Connect the USB end of the Ethernet adapter to the
USB port on the TiVo Series2 DVR.
2. Connect Ethernet to the adapter. Plug one end of an Ethernet cable into
the Ethernet adapter.
3. Connect Ethernet to the hub router. Plug the other end of the Ethernet
cable into your home network’s hub or router.
4. Important message. The first time you press the TiVo button after you
connect a network adapter, you will see an Important Message. Review
it, then press SELECT on the TiVo remote to go to TiVo Central.
it, then press SELECT on the TiVo remote to go to TiVo Central.
5. Next Step. If your home network has DHCP, wait a few minutes for your
DVR to automatically complete its network settings, and then you’re
done!
done!
If your home network doesn’t have DHCP, or if you’re having trouble
establishing a network connection, go to “TCP/IP Settings for a Home
Network” on page 15.
establishing a network connection, go to “TCP/IP Settings for a Home
Network” on page 15.
USB-
Eth
ernet