Lenovo A700 用户指南

Chapter 8. Replacing hardware

12. Install the new optical drive.
 

(1) Slide the new optical drive into the drive bay and screw it in.

 

(2) Align then screw in the new hard disk drive and bay to the chassis.

13. Install hard disk drive and motherboard cover back.
14. Install the computer cover and stand.

Turn off the computer and wait 3 to 5 minutes to let the computer 
cool down before replacing a memory module. 

For this procedure, it helps to place the computer face-down on a 
soft flat surface. Lenovo recommends that you use a blanket, towel, 
or other soft cloth to protect the touch screen surface from scratches 
or other damage.

1.  Remove any media (diskettes, CDs, or memory cards) from the drives, 

shut down the operating system, turn off all attached devices, and the 
computer.

2.  Unplug all power cords from electrical outlets.
3.  Disconnect all cables attached to the computer. This includes power 

cords, input/output (I/O) cables, and any other cables that are 
connected to the computer. Refer to “Locating connectors on the rear 
of the computer”.

4.  Remove the computer stand. Refer to “Removing the computer stand”.
5.  Remove the computer cover. Refer to “Removing the computer cover”.
6.  Remove the motherboard cover. Refer to “Removing the motherboard 

cover”.