Lenovo m58p 3063 用户指南
To install or replace a PCI card:
1.
1.
Open the computer cover. See “Opening the computer cover” on page 14.
2.
Rotate the card retainer to the open position. If you are installing a PCI card,
remove the appropriate slot cover. If you are replacing an old PCI card, remove
the old card that is currently installed.
remove the appropriate slot cover. If you are replacing an old PCI card, remove
the old card that is currently installed.
Notes:
a.
The card fits tightly into the card slot. If necessary, alternate moving each
side of the card a small amount until it is removed from the card slot.
side of the card a small amount until it is removed from the card slot.
b.
If the card is held in place by a retaining latch, press the card retaining latch
1 as shown to disengage the latch. Grasp the card and gently pull it out
of the slot.
1 as shown to disengage the latch. Grasp the card and gently pull it out
of the slot.
3.
Remove the new PCI card from its static-protective package.
Figure 10. Removing a PCI card
Chapter 2. Installing options and replacing hardware
19