Sceptre x32gv-komodo 用户指南

SCEPTRE X32 HDTV User Manual 

- 24 - 

www.SCEPTRE.com 

 

 

 
 

1.  Make sure the power of X32 LCD HDTV is turned off. 
2.  Make sure there is an antenna or cable connection to the VCR 

already. 

3.  Use a Coaxial RF cable and connect from your VCR’s Antenna Out 

or Output to TV to the ATSC/NTSC port off the back of your X32 
LCD HDTV. 

4.  Turn on X32 LCD HDTV. 
5.  Select TV (Air) for antenna or TV (Cable) for digital cable from either 

your remote control’s source button or source button on the right side 
of the TV. 

6.  Use the On Screen Display to scan for channels. 
 
Please Note :  
 

•  Some VCRs require you to turn it on before its output will 

have a signal to the TV.  Please consult your VCR manual 
for further reference. 

•  Not all broadcasts are in High Definition (HD).  Please refer 

to your local broadcasting stations for more information. 

•  The X32 LCD HDTV’s tuner is designed for HDTV therefore 

requires a stronger signal than normal TVs.  If you cannot 
achieve that signal level with your antenna or cable, your 
X32 LCD HDTV might lose picture or sound.