Axis M3203 用户手册

This page provides access to the advanced image settings for 
the AXIS M32 Series.

Color level - Select an appropriate level by entering a value in 

the range 0-100. Lower values mean less color saturation, 
the value 100 gives maximum color saturation.

Brightness - The image brightness can be adjusted in the 

range 0-100, where a higher value produces a brighter 
image.

Sharpness - Controls the amount of sharpening applied to the 

image.

Contrast - Adjust the image's contrast by raising or lowering the value in this field.

This is used to compensate for the different colors present in different light sources, to make the colors in the image appear 
the same. The AXIS M32 Series network camera can be set to automatically identify the light source and compensate for its 
color. Alternatively, the type of light source can be manually selected from the drop-down list. Please see the online help files 

 for a description of each available setting.

Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth 
considerations.
Exposure value - Use this slidebar to fine tune the exposure.
Exposure control - This setting is used to remove 50/60 Hz flicker.
Enable Backlight compensation - Backlight compensation makes the subject appear clearer when the image background is 

too bright, or the subject too dark.

Exposure zones - this setting determines which part of the image is used to calculate the exposure.
Exposure priority  - this setting defines the balance between image quality and the frame rate. Higher image quality may 

reduce frame rate and increase motion blur. Prioritized frame rate may increase image noise. This setting is only useful 
for modifying the video image of a monitored area with poor lighting conditions.

Once satisfied, click 

Save. Click View to view the video stream with the current configuration.

The following options are available for the overlay image settings: 

Uploaded image as overlay is a text and/or a static image superimposed over the video image. To upload an image to the 
camera, e.g. a logotype, browse to the image on the computer and click 

Upload. 

To place the overlay image at specific coordinates in the live view image, check 

Include overlay image at the coordinates and 

enter the X and Y coordinates.

Once satisfied, click 

Save. Click View to view the overlay image in the video stream.

Privacy masks are up to 3 configurable areas of solid color that allow concealment of parts of the image that are not to be 
viewable. Privacy masks cannot even be bypassed via the VAPIX® Application Programming Interface (API).