Axis M3203 用户手册

An 

event or Event Type in the camera triggers actions when activated. This section describes how to configure the camera to 

perform certain actions when events occur.

Event Servers are used to receive uploaded image files and/or notification messages. To set up Event Server connections in 
your camera, go to 

Setup > Event Configuration > Event Servers and enter the required information for the required server 

type.

For details on each setting, see the online help 

 available from each web page. When the setup is complete, the 

connection can be tested by clicking the 

Test button (the connection test takes approximately 10 seconds). 

An 

Event Type describes how and when the camera performs certain actions.

If somebody passes in front of a camera and an event has been configured to detect and respond to motion, 

the camera can record and saves images to an FTP server, and can send a notification e-mail to an e-mail address. Images 
can be sent as e-mail attachments.

A set of parameters describing how and when the camera performs certain actions

An event that is started by some sort of signal, for example, an external device such as a door 
switch, motion detection, or system event.

Scheduled Event - see page 23 Pre-programmed time period(s) during which an event runs.

This occurs when the event runs, for example, uploading of images to an FTP server, or email notifi-
cation.

• Receives uploaded images

• Descriptive name of your choice
• Network address (IP address or host name)
• User Name and Password 

• Receives notification messages
• Receives uploaded images

• Descriptive name of your choice
• URL (IP address or host name)
• User Name and Password 

• Receives notification messages

• Descriptive name of your choice
• Network address (IP address or host name)
• Port number