Axis M3203 用户手册
5
AXIS M32 Series
Overview
Network Connector - The camera connects to the network via a standard network connector. Supporting NWay, the camera
detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). Supporting PoE (Power over Ethernet), the
camera can be powered directly from the network cabling.
detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). Supporting PoE (Power over Ethernet), the
camera can be powered directly from the network cabling.
Serial Number Label - the serial number may be required during installation.
Control Button - press this button until the status LED blinks green to install the camera using an AVHS service (see page
29), or the AXIS Internet Dynamic DNS Service described on page 30. To restore the factory default settings using the control
button, follow the instructions Resetting to the Factory Default Settings, on page 35.
Control Button - press this button until the status LED blinks green to install the camera using an AVHS service (see page
29), or the AXIS Internet Dynamic DNS Service described on page 30. To restore the factory default settings using the control
button, follow the instructions Resetting to the Factory Default Settings, on page 35.
Product ID & Serial number (S/N).
The serial number may be
required during the installation.
required during the installation.
Dimensions
HxWxD = 94 x 144 x 132mm (3.7" x 5.7" x 5.2")
AXIS M3203, AXIS M3204: 425 g (0.94 lb)
AXIS M3203-V, AXIS M3204-V: 580 g (1.28 lb)
Cover plates
Network indicator
LED
Control button
Network connector
Power
indicator LED
16mm cable conduit
(not supplied) fitted
to M32 series
Status indicator LED