Axis M3203 用户手册

How you customize the 

Live View page determines which buttons are visible. Not all the buttons described below show up 

unless configured to do so. 

The following controls are available if digital PTZ is enabled, see  Pan Tilt Zoom (PTZ), on page 19. The administrator can enable 
and disable the controls for specific users under 

System Options > Security > Users > User List.

The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile on the 

Live View 

page. Stream profiles are configured under Video > Stream Profiles, see Stream Profiles, on page 14 for more information.

The 

Snapshot button saves a snapshot of the video image on display. Right-click on the video image to save it in JPEG 

format on your computer. This button is primarily intended for use when the AMC viewer toolbar is not available.

The 

AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only. See AXIS Media Control 

 for more information. AMC displays the following buttons:

The 

Play button connects to the Axis product and starts playing a media stream.

The 

Stop button stops the video stream being played.

The 

Snapshot button takes a snapshot of the current image. The location where the image is saved can be 

specified in the AMC Control Panel.

Click the 

View Full Screen button and the video image will fill the entire screen. Press Esc (Escape) on the 

computer keyboard to cancel full screen view.

The 

Record button is used to record the current video stream. The location where the recording is saved can 

be specified in the AMC Control Panel.

Click the 

Emulate joystick mode button and click in the image to move the camera view in the direction of the 

mouse pointer. 

Click the 

Center mode button and click on a position in the image to center the camera view on that position.

Pan, Tilt and Zoom bars — Clicking a position directly on the bar moves the camera view directly to the new posi-
tion in one smooth movement. Clicking on the arrows at the ends of a bar causes an incremental change. Clicking 
Zoom out to overview image will set the camera to the minimum zoom position. In this position, the camera 
cannot pan or tilt.

Click the 

Ctrl panel button to open the PTZ control panel which provides additional PTZ controls. 

User-defined buttons can also appear in the Control panel, see 

 Advanced, on page 23.

Click the 

Home button to steer the camera to the Home position. The Home position is defined under 

PTZ> Preset Positions in the web interface.