Rackmount smk-580 用户指南
You need to retype the password again for rechecking your previous key-in password is
matched or not.
matched or not.
ESC : QUIT
ENTER : COMPLETE
NEW PASSWORD COMPLETE
d. The “ CONSOLE ON/OFF “ means to manage the SMK-580. If you select “ CONSOLE
ON “, it means that any user can use the console. If you select “ CONSOLE OFF “(factory
default OFF state), it means that any user will not be allowed to use the console unless
you enter the password. When you enter the password already and pass the SMK-580
authentication, the CONSOLE will be set to ON. After you finish using SMK-580, please
don’t forget to set CONSOLE ON state to OFF state. Besides, if current CONSOLE is ON
state and you reset SMK-580, the CONSOLE will be set from ON state back to OFF state.
default OFF state), it means that any user will not be allowed to use the console unless
you enter the password. When you enter the password already and pass the SMK-580
authentication, the CONSOLE will be set to ON. After you finish using SMK-580, please
don’t forget to set CONSOLE ON state to OFF state. Besides, if current CONSOLE is ON
state and you reset SMK-580, the CONSOLE will be set from ON state back to OFF state.
e.
W
hen you finish the setting up of PC name and exiting the OSD setting mode, you will find
the PC name showed at the up-left corner of monitor. Now, you can use “ESC” key to
clear the message right away if you don’t need it.
clear the message right away if you don’t need it.
☼SYSTEM 02
102
f. If you want OSD returning back to factory default value, you can execute “SCROLL
LOCK”, “SCROLL LOCK”, “R” keys in this order. The Seven segment LEDs on the front
panel will be flashed during the refresh process.
panel will be flashed during the refresh process.
ROM REFLASH
When the OSD value back to default setting, the seven segment LEDs on the front panel
will stop flashing
Troubleshooting
1. Ensure that all cables are well seated. Label all of cables with the number for each
respective computer to avoid confusion.
2. The recommended VGA cable distance is 5 meters maximum without ghosting and
degradation. Normally, the cable length is based on driver capacity of your VGA card. If
you need longer VGA cable, please use VGA extender to accomplish your applications.
you need longer VGA cable, please use VGA extender to accomplish your applications.
3. The recommended PS2 cable distance is 5 meters maximum. Normally, the cable length is
based on driver capacity of your motherboard PS2 port. If you need longer PS2 cable,
please use PS2 extender to accomplish your applications.
please use PS2 extender to accomplish your applications.
14