Denon dvd-3910 操作指南

10

• Read the manuals of all the components when making

connections.

• Keep the power supply cord unplugged until all connections

have been completed.

• If the power is on when connections are made, noise may

be generated and damage the speakers.

• Be sure to connect the left and right channels properly, L

(left) to L, R (right) to R.

• Plug the power supply cord securely into the power outlet.

Incomplete connection may result in noise.

• Binding the power supply cord together with connection

cords may result in humming or noise.

• Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DVD-3910’s VIDEO OUT

or S-VIDEO OUT and AUDIO OUT.

DVD-3910

TV

S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer
picture.
If the TV is equipped with an S-Video input connector, we recommend connecting it to
the DVD-3910’s S-Video output connector using a commercially available S-Video
connection cord.

To power outlet

• Connect the DVD-3910’s video outputs to the TV either

directly or through an AV amplifier. Do not connect it via a
VCR (video cassette recorder). Some discs contain copy
prohibit signals. If such discs are played via a VCR, the copy
prohibit system may cause disturbance in the picture.

• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to

comply with your TV’s video format. When the TV is NTSC
formatted set to NTSC. (See pages 36, 37.)

• To use with 5.1ch audio output, set “2CH (SRS OFF)” or

“2CH (SRS ON)” under “AUDIO CHANNEL” in “AUDIO
SETUP” on the “SETUP” menu to the initial settings. 
(See page 38.)

• Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to

comply with your TV’s aspect. (See page 36.)

• To use with video out or s-video output, set “INTERLACED”

in “VIDEO OUT” in “VIDEO SETUP” in “SETUP” at the
initial settings. (See pages 36, 37.)