NEC LCD1550V 用户手册

8

Five color presets select the desired color setting.  Each color setting is adjusted at
the factory.
R,G,B :

 Increases or decreases Red, Green or Blue color depending upon which

is selected.  The change in color will appear on screen and the direction (increase
or decrease) will be shown by the bars.

 You can choose where you would like the OSM control

image to appear on your screen. Selecting OSM Location allows you to
manually adjust the position of the OSM control menu left, right, down or up.

 The OSM control menu will stay on as long as it is in use. In

the OSM Turn Off submenu, you can select how long the monitor waits after
the last touch of a button to shut off the OSM control menu. The preset choices
are 10, 20, 30, 45, 60 and 120 seconds.

This control completely locks out access to all OSM control

functions. When attempting to activate OSM controls while in the Lock Out
mode, a screen will appear indicating the OSM controls are locked out. To
activate the OSM Lock Out function, press  , then   and hold down
simultaneously. To de-activate the OSM Lock Out, press  , then   and hold
down simultaneously.
RESOLUTION NOTIFIER:

 This optimal resolution is 1024 x 768. If ON is

selected, a message will appear on the screen after 30 seconds, notifying you
that the resolution is not at 1024 x 768.

 Selecting Factory Preset allows you to reset all OSM control

settings back to the factory settings. The RESET button will need to be held
down for several seconds to take effect. Individual settings can be reset by
highlighting the control to be reset and pressing the RESET button.