NEC LCD1970NX 用户手册
![NEC](https://files.manualsbrain.com/attachments/44abc27a7ab3d3ebaea5604c1237604964b3b528/common/fit/150/50/0a4ba346278cf7fed7416c8056bd03af105e868674aa2dfa47e23e007d42/brand_logo.png)
16
Monitor
MultiSync
¨
LCD1970NX Notes
Specifi cations
Monitor
LCD Module
Diagonal :
19.0 inch
Active matrix; thin Þ lm transistor (TFT)
Viewable Image Size :
19.0 inch
liquid crystal display (LCD); 0.294 mm dot
Native Resolution (Pixel Count) :
1280 x1024 pitch; 230cd/m
2
white luminence;
800:1 contrast ratio, typical
Input Signal
Video :
ANALOG 0.7 Vp-p/75 Ohms
Digital Input: DVI
Sync :
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative
Sync on Green (Video 0.7Vp-p and Sync Negative 0.3Vp-p)
Display Colors
16,777,216
Dependent on display card used.
Maximum
Left/Right :
88¡/88¡ (CR>10)
Viewing Angles
Up/Down :
88¡/88¡ (CR>10)
Synchronization
Horizontal :
31.5 kHz to 81.1 kHz
Automatically
Range
Vertical :
56.0 Hz to 75.0 Hz
Automatically
Resolutions Supported
720 x 400*
1
:VGA text
Some systems may not support all modes listed.
640 x 480*
1
@ 60 Hz to 75 Hz
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768*
1
@ 60 Hz to 75 Hz
1152 x 870*
1
@ 75 Hz
1280 x 1024 @ 60 Hz to 75 Hz ....................NEC DISPLAY SOLUTIONS cites
recommended resolution at 60 Hz for
optimal display performance.
Active Display Area Horizontal : 376.3 mm/14.8 inches
Vertical : 301.1 mm/11.9 inches
USB Hub
USB Hub
I/P:
USB SpeciÞ cation Revision 2.0
Port:
Upstream 1
Downstream 4
Load Current:
Maximum 0.5A per port
Power Supply
100 Ð 240 V~ 50/60 Hz
Current Rating
1.2 Ð 0.6A
Dimensions
412.5 mm (W) x 386.5-496.5 mm (H) x 220.0 mm (D)
16.2 inches (W) x 15.2-19.5 inches (H) x 8.7 inches (D)
Weight
8.1 kg
17.9 lbs
Environmental Considerations
Operating Temperature :
5¡C to 35¡C/41¡F to 95¡F
Humidity :
30% to 80%
Feet :
0 to 10,000 Feet
Storage Temperature :
-10¡C to 60¡C/14¡F to 140¡F
Humidity :
10% to 85%
Feet :
0 to 40,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current ß at panel technologies when displaying non-native resolutions full screen. In ß at panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical speciÞ cations are subject to change without notice.
Specifi cations
-continued