UMAX 3400 用户手册

FOR MACINTOSH USERS:  When the UMAX VistaScan window opens on your desktop, double-
click on the UMAX CD Installer icon to begin the software installation. 

 
2.  Follow the onscreen instructions to complete the installation of Presto! PageManager, UMAX 

VistaScan, OmniPage LE, and the online User’s Guide. 

 
3.  Restart your computer as suggested by the onscreen instructions to complete the installation. 
 

 
After you have removed the scanner from the box and verified that all of the package contents have been 
included, please check to make sure that your computer is compatible with the scanner’s connectors. 
 

About Scanner Connectors 

 

 
Many newer computers, both PC and Macintosh, rely on USB technology as the primary method of 
communication between the computer and its peripherals.  With this new USB “plug-and-play” technology 
your computer automatically configures peripherals.  If your computer has a USB port, you must make sure 
that this port is enabled in the system BIOS.  Please refer to the troubleshooting section to learn more about 
enabling the USB Port. 
 

 
To use your scanner you need to understand what type of connectors you have on your computer.  To 
determine the connector type, look at the back panel of your computer. 
 

 

 

 

 

 

 

 
• 

A USB port is a small slot ½” long and ¼” wide. 

 
NOTE:  If your computer has a USB port, check to make sure that your computer’s operating system 
supports USB.  The following factory-installed operating systems support USB:  Microsoft Windows 98 or 
higher, and Mac OS 8.1 or higher. 
 

Setting Up – General Information 

 
Find a suitable location near your computer to place the scanner. 
 
CAUTION:  Make sure the surface is flat.  Operating your scanner on an uneven surface can damage the 
internal components. 
 

Connecting the Hardware Interface Cables

 

 
If your computer has a USB port, follow the instructions in the Connecting the USB Cable section to 
connect the scanner to your computer. 
 
Make sure your computer is turned off before proceeding. 
 

 

7