UMAX 6400 用户指南

UMAX Astra 6400/6450 Owner’s Guide

61

Once you click on the desired image type, the scanner starts
scanning the image using the appropriate settings.

After the scan is complete, a print window appears. Verify that
the destination settings are correct and then click the Print
button.

6. When the scan is complete, the image is printed on your printer.

Scanning an image to e-mail is similar to the procedure described in
the Using VistaScan to Scan and Print Images section earlier in this
guide. Scan to e-mail works with Microsoft Exchange and Lotus
CC Mail. Follow steps 1 through 3 as listed in the Scan and Print
instructions, then proceed with the following steps:

1. Click the E-mail icon to set the scanner settings to the best

values for scanning an image to e-mail.

NOTE: You may need to adjust the destination preferences in
the VistaScan Beginner window. For information about setting
preferences, refer to Setting the VistaScan Preferences section.

2. Click the Web Image icon in the Click to Scan area of the

VistaScan Beginner window. The scanner starts scanning the
image using the appropriate settings for web images.

3. After the image is scanned, a Microsoft Exchange or Lotus

cc:Mail e-mail window appears with an icon representing the
scanned image embedded in the message area of the window.

NOTE:  For more information about using Microsoft Exchange
or Lotus cc:Mail refer to the user documentation that came with
the application.

4. 

Fill out the rest of the standard e-mail information (address,
subject, etc.) as you ordinarily would. Send the e-mail.