UMAX e3420 用户指南

card. You can find the registration card in the CD-ROM case.
Continue with the installation process by following the
remaining screen prompts.

Installing the UMAX Scanner CD

1. Insert the UMAX scanner CD into your CD-ROM drive. The

installation program should start automatically. The installation
program detects the language used on your system and selects it
as the language to be installed. Please press the “Next” button
and go to the next step.

Note : If the installation program doesn’t start automatically,
select StartèProgramsèWindows Explorer and then double-
click on the VistaScan icon (your CD-ROM drive)èSetup icon
(as shown in picture B).

The installation program will automatically install the
VistaScan TWAIN driver and other application software
bundled in the CD. It is recommended to install all the software
bundled.

Installing the Hardware

USB Connectors

Many newer computers rely on USB technology as the primary
method of communication between the computer and its
peripherals. With this new USB “plug-and-play” technology your
computer automatically configures peripherals.
If your computer has a USB port, you must make sure that this port
is enabled in the system BIOS. Please refer to the troubleshooting
section to learn more about enabling the USB port.

Checking Your Computer’s Connectors

To use your scanner you need to understand what type of
connectors you have on your computer. To determine the connector
type, look at the back panel of your computer: