UMAX 1000 用户指南

3. Restart your computer as suggested by the on-screen instructions. Once your computer

restarts, click the ‘X’ in the upper right corner of all open windows to close. You are now
finished installing the applications on the PowerLook 1000 CD.

For users of APPLE Macintosh computers:

1. Install the scanner driver by inserting the scanner CD into the CD-ROM drive of your

computer.

2. Double-click on the scanner CD installer icon. Follow the on-screen instructions to install the

drivers.

3. Restart your computer.

Hardware Installation

Step 1. Unlocking the Carriage

1. Before operating the scanner, please unlock the restraint.

2. To better access the lock switch, remove the document cover by lifting it up from the scanner.

3. To unlock the restraint, move the carriage lock toward the unlocked position as shown above.

Note:

When transporting or shipping the scanner over a significant distance, be sure to relock the optical
assembly to avoid damaging it. Before re-locking the assembly, make sure the optical assembly of the
scanner is in the “Home Position” by doing the following:

1.  Turn the scanner off and then on again.

2.  Wait for the ready indicator of the scanner’s to light up.

3.  Turn off the power of the scanner again.  The optical assembly should be in the Home Position.

4.  To lock the optical assembly, move the carriage lock until it points to the locked symbol.