UMAX powerlook iii 用户指南

9

This chapter describes how you can connect and use the PowerLook III scanner

with your IBM PC or compatible computer.

Before you can use your scanner with your computer, you need to install the

interface card into your PC.

To install the card into one of the computer's expansion slots, observe the following

procedures:

Note:  The interface card is sensitive to static electricity. Handle the card by its

mounting bracket, particularly when removing the card from its anti-static

packaging.

1.  Turn the computer power off and unplug the power cord.

2.  Remove the housing cover of the computer. Follow the instructions provided in

your PC’s reference manual.

3.  Remove the metal cover corresponding to your chosen slot. Keep the removed

screw so that it can be used to fasten the interface card.

4.  Gently insert the interface card into the slot until it is firmly seated in the slot.

 

5.  Secure the card in place with the screw removed from the expansion slot cover

in step 3 above.

6.  Replace the housing cover following the instructions provided in the computer’s

reference manual.