Cyberhome hgl 1710 操作指南

® 

 

TM  

Your unit is compliant with the VESA ® FDMI

Standard for mounting interfaces, hole patterns and associated 

cable/power supply locations for LCD monitors.  Mounting hardware come in different types and sizes, and are available 
through third party manufacturers.  Please consult your dealer on availability.  When ordering, make sure the hardware is 
compatible with VESA MIS-D, 100, C compliant monitors. Mounting screw holes are provided on the back of your LCD 
television.  These are protected by plugs that can be pulled out easily to reveal the screw holes.  (See Illustration 1)  

When mounting, please follow your mounting hardware’s manufacturer’s instructions for installation and use.
  
To remove your unit’s stand, follow instructions in Illustration 2.

I.  Locate your unit’s stand 
and screws 1 and 2.

II. Lay your 
Television screen on 
a soft surface such 
as a mattress, face 
down.  Remove 
screws 1 and 2 with 
a Phillips head 
screwdriver.

III. Remove the stand’s 
cover by pulling it while 
squeezing sides A and B.  

IV.  Remove screws 3,4,5 & 
6 as shown.  Stand should 
come off from main unit.

V. Remove remaining screws 7 
and 8.  This should completely 
remove all your unit’s stand 
hardware.  Please keep them in 
a safe place for future use.