Uniden dect4066a 用户指南

41

In about 30 seconds, the handset display should say Registration 
Complete. Press 

 and make sure you get a dial tone.

 -you don't hear a dial tone

 -the display says Registration Failed 

Making sure the handset is fully 

charged, then start over at step 1.

Moisture and liquid can damage your cordless phone.

 



If the handset or base is exposed to moisture or liquid, but only the 

exterior plastic housing is affected, wipe off the liquid, and use as 

normal.

 



If moisture or liquid has entered the plastic housing (i.e. liquid can 

be heard in the phone or liquid has entered the handset battery 

compartment or vent openings on the base), follow these steps:

1.  Remove the battery cover and disconnect the 

battery. 

2.  Let dry for at least 3 days with the battery 

disconnected and the cover off for ventilation.

3.  After the handset dries, reconnect the battery 

pack and replace the cover. Recharge the 

battery fully (16-20 hours) before using.

1.  Disconnect the AC 

adapter to cut off the 

power.

2. Disconnect the 

telephone cord.

3.  Let dry for at least 3 days 

before reconnecting.