Uniden dect4066a 用户指南

5

Pick up the handset from the base and press 

. The phone should 

pick up line 1 automatically and change the display to show Talk  , 
and you should hear a dial tone. 
When you get a dial tone, make a test call; press 

 to hang up.

the base display says   
Check or you don't hear a 

dial tone

checking the connection between the 

base and the phone jack: make sure 

the cord is connected to 

.

you keep hearing a dial 

tone

setting line 1 to pulse dialing (see page 

6).

there's a lot of noise or 

static

see page 38 for tips on avoiding 

interference.

the handset display says 

resetting the handset (see page 40). If 

you have accessory handsets, try using 

a different handset for the test call.

Once you can make calls on line 1, make a test call on the second 
line. Pick up the handset and press the unmarked key under 

. 

You should hear a dial tone and the display should show Talk  .

the display says 

 Check or 

you don't hear a 

dial tone

checking the connection 

between the base and the phone 

jack: if you have a separate jack 

for each line, make sure the 

cord is connected to 

.

you keep 

hearing a dial 

tone 

setting line 2 to pulse dialing 

(see page 6).

Test any accessory handsets the same way. If you can't get a dial 
tone or the handset display says Unavailable, try moving the handset 
closer to the base or resetting it (see page 40).

   SUN 12:00A
   Handset #1

.+0' /'07 .+0'